technical specifications singlemode multimode insertion loss: < 0.3db insertion loss: < 0.3db return loss: < -50db (default) < -55db (ultra) aa _ _ - _ _ - _ - _ _ _ connector one end 23 - lc singlemode 23u - lc singlemode ultra polish 29 - lc multimode 32 - lc duplex singlemode 32u - lc duplex singlemode ultra polish 33 - lc duplex multimode connector other end 23 - lc singlemode 23u - lc singlemode ultra polish 29 - lc multimode 32 - lc duplex singlemode 32u - lc duplex singlemode ultra polish 33 - lc duplex multimode ot - other connector, please state. xx - pigtail (no connector) length (in metres) ie: 005 is 5 metres, 0.5 is 0.5 metres cable singlemode e - 900um buffered fibre j - duplex 2.0mm od zip cord l - simplex 2.0mm od cord multimode 50/125um f - 900um buffered fibre n - duplex2.0mm od zip cord multimode 62.5/125um g - 900um buffered fibre m - duplex 2.0mm od zip cord for other cords, please contact amphenol assembly code amphenol new product amphenol australia pty ltd http://www.amphenol.com.au 2 fiveways blvd, keysborough vic 3173 po box 241 noble park vic 3174 tel: (03) 8796 8888 fax: (03) 8796 8801 email: info@amphenol.com.au toll free: 1800 674 559 the lc connector was designed by lucent technology?s bell labs. it is a small form factor connector based on the familiar rj-45 telephone interface and is available in both simplex and duplex designs. it has a free floating ceramic ferrule allowing for cable movement without adversely effecting the mate. the lc is a spring loaded connector for physical contact butt coupling. it has a pull-proof locking system and couples with an audible latching system to indicate positive mating. lc assemblies connector adapters are available, please contact amphenol for your requirements
|